Lenco 14""x12"" Heavy Duty Trim Tab Kit 12v Requires Switch - Lenco Marine

Lenco 14""x12"" Heavy Duty Trim Tab Kit 12v Requires Switch

$1,631.19

Lenco 14"" X 12"" Heavy Duty Perfomance Trim Tab Kit - Requires Switch

Model: 15042-101

The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Boat lengths 18’ (5.5 m) to 42’ (12.8 m). Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16 (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed.

Note: Boat-mounting hardware to be supplied by the customer

Specifications
Plane Size L x W 14"" x 12""
Boat length 19' - 36'
Min Transom Height 10.5""
Voltage 12vDC

What's in the Box:
  • (2) 12-gauge stainless steel Electro-Polished blades
  • (2) 15055-001 XD Extreme Duty actuators with 6’ (1.8 m) leads & Deutsch connectors
  • (2) 30133-103 actuator extension wiring harnesses - 20’ (6.1 m) length
  • Lenco owner's/installation manual
Lenco 14"" X 12"" Heavy Duty Perfomance Trim Tab Kit - Requires SwitchModel: 15042-101The Heavy Duty series is designed & built for the boats that need extra strength to support them...
Add to WishlistCompare

amazon paymentsamerican expressapple paybitcoingoogle payjcbmasterpaypalshopify paysofortvisa
Ask a Question
Vendor: Lenco Marine
Type: Trim Tabs
SKU: WTLEN15042101
Barcode: 874847005722
Availability: In Stock Pre order Out of stock
Categories: Trim Tabs
Tags: cscart
Description

Lenco 14"" X 12"" Heavy Duty Perfomance Trim Tab Kit - Requires Switch

Model: 15042-101

The Heavy Duty series is designed & built for the boats that need extra strength to support them in rougher water at higher speeds. Boat lengths 18’ (5.5 m) to 42’ (12.8 m). Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4" (6.4 mm) diameter hinge pin. Full transom back plate with welded on stainless steel upper & adjustable lower actuator mounting brackets, 5/16 (.8 cm) stainless steel mounting bolts & mechanical strain-relief cable seals. 3.75" (9.5 cm) sacrificial anodes installed.

Note: Boat-mounting hardware to be supplied by the customer

Specifications
Plane Size L x W 14"" x 12""
Boat length 19' - 36'
Min Transom Height 10.5""
Voltage 12vDC

What's in the Box:
  • (2) 12-gauge stainless steel Electro-Polished blades
  • (2) 15055-001 XD Extreme Duty actuators with 6’ (1.8 m) leads & Deutsch connectors
  • (2) 30133-103 actuator extension wiring harnesses - 20’ (6.1 m) length
  • Lenco owner's/installation manual
Reviews